Corporate Office
616 West Virginia
Houston, Texas 77076
(713) 691-9991
Fax (713) 691-9992

Conroe
(936) 788-1994

Bryan/College Station
(979) 260-4114

Toll Free
(888) 707-7487

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Gutters:

The gutter material is a 3105 Aluminum Alloy (.027 gauge); that has H-15 Tensile strength.  All pre-painted products are back by a manufacturer’s warranty against blistering, peeling and/or flaking.

Inside/Outside miters are machine stamped parts.  They are secured to the gutter with 1/2" pre-painted screws.

Gutters are secured to the fascia with manufactured stamped hardened Aluminum hidden hanger placed approximately 3' centers, with 2” wood grip screws.

Drip-Edge:

1 ˝ x 1 ˝ is recommended; it will prevent water from leaking behind the gutters and causing the fascia boards to rot.

Aluminum Clips:

Aluminum support clips are made from gutter coil .027 gauge; that has H-15 Tensile strength, placed behind hidden hangers approximately 3' on centers. This is recommended to keep the gutters from sagging back into fascia board.

Downspout & Elbow Products:

All aluminum downspouts (.019 gauge) and come in sizes of 2x3; 3x4 and 4x5.  Aluminum elbows have a 75 degree angle in “A” (Front) or “B” (Side) styles. Custom offsets are available from 1" through 6" for special returns and are generally used for extending past brick ledges.

Offset      “A” Elbow*     “B” Elbow*

*Note:  Bottom elbows can be interchanged.

Links